Delcam to hold webinars on Vortex high-efficiency roughing

Delcam is to present a series of webinars on its Vortex high-efficiency roughing strategy, which has been shown to achieve savings of up to 90% in the time needed for area clearance.  

Using Vortex in Delcam for SolidWorks gave a 90% time saving when roughing this mould insert.
Using Vortex in Delcam for SolidWorks gave a 90% time saving when roughing this mould insert.

The webinars, which will run under the headline New Tools, New Rules, will cover the use of Vortex in each of Delcam’s CAM products as follows:

  • 20th November – Vortex in PowerMILL
  • 27th November – Vortex in FeatureCAM
  • 9th December – Vortex in FeatureCAM
  • 11th December – Vortex in PartMaker
  • 18th December – Vortex in Delcam for SolidWorks

For full details and to register, go to www.vortexmachining.com/events/index.asp

The Vortex strategy gives the fastest safe metal removal from solid carbide tooling, in particular designs that give deeper cuts by using the full flute length as the cutting surface.  It can be used for two- and three-axis roughing, three-plus-two-axis area clearance and for rest machining.  It gives benefits when machining all types of materials, including titanium, tool steel and alloys such as Inconel.
For further information on Delcam’s range of CAM software, please contact:
Delcam plc     
Small Heath Business Park,
Birmingham, B10 0HJ, UK
www.delcam.com

Peter Dickin, Marketing Manager
Direct phone: +44 (0)121 683 1081
[email protected]

.

…brought to you by Eurotec-Online.com