Affolter launches groundbreaking Worm Screw Power Skiving technology

Affolter Technologies SA, the technology and world market leader in micro gear hobbing centers for the watchmaking and micromechanical industries, launches a groundbreaking innovation: Worm Screw Power Skiving (WSPS).

AF110 plus2

“This cutting-edge technology was developed by our engineering experts in an intensive R&D process. Worm Screw Power Skiving allows us to finish a high-precision worm in only 6 seconds. If done by worm hobbing, every piece will take 25 seconds”, explains Managing Director Vincent Affolter. In other words: WSPS makes producers 4 times more efficient. Mr. Affolter: “This will increase the productivity and efficiency of manufacturers in the automotive and aircraft industries considerably.”

 
Big demand
Many producers in these industries need to manufacture large quantities of high-precision worms. The WSPS technology focuses on small worms with a module of 0.3 to 1.5. “Such worms are used in car seats or trunks, for instance. We see a big demand in the automotive industry, but also in other sectors”, explains Mr. Affolter.

 
Extremely fast process
The idea behind the new technology: Unlike in worm hobbing, where the hob turns much faster than the workpiece, the Affolter experts inverted the process. “The workpiece turns extremely fast, with 2 new spindles up to 12’000rpm, while the cutter turns much slower. Only highest quality machines like the Affolter AF100 plus and AF110 plus can reach this speed and at the same time provide the necessary stiffness”, states the Managing Director.

 
AF110 plus: convincing results
Over the course of the recent months, the Affolter engineers redesigned the well-established Gear Line model AF110 to optimize the WSPS process. The result is the brand new Gear Hobbing Machine AF110 plus. The workpiece spindles were successfully remodeled to reach the high speeds needed. The Affolter Marketing and R&D team also focused on completely redesigning the machine. “We integrated a cutting fluid filtration system and a chip disposal solution. This allows us to cope with all the requirements imposed by the workpiece up to module 1.5 and the production of large volumes of chips”, says Mr. Affolter. Additionally, the Affolter engineers and the marketing team improved the ergonomics through a redefinition of the machine base and surrounding as well as the human-machine interface. The very flexible AF110 plus also convinces with a function that allows to operate at reduced speeds with the hood open (Full Safety setup machine mode). Extensive test runs proved very successful, as Vincent Affolter recounts: “We achieved outstanding results processing both steel and brass. The new AF110 plus and the WSPS technology will open completely new opportunities for our customers.”

 
In the spotlight
A prototype of the AF110 plus will be showcased at the trade shows AMB in Stuttgart from 13-17 September and Micronora in Besançon/France from 27-30 September. Furthermore, Affolter will present the WSPS technology at IMTS in Chicago from 12-17 September and 
JIMTOF in Tokyo from 17-22 November.

www.affoltergroup.ch

Leave a Reply