3D Measurement capabilities webinar

In this webinar you will learn how Alicona’s 3D measurement device helps its customers improve process monitoring in micro machining. If you are interested in this webinar but unable to attend – register all the same. You will receive a link to the recorded version after the webinar.

The webinar will unveil a few hot topics

  • Effects of surface finish on tool performance
  • Optimize machining processes through highly reliable 3D measurement data
  • Share visualization data with your clients to promote your machine platforms


3D Measurement Capabilities for Professional Process Monitoring

  • Date: August 6, 2013
  • Time: 10:00 AM – 11:00 AM CDT


  • Brad Etter, Alicona Sales Manager US
  • Brain Kyte, Alicona Sales Director UK


What you can expect

  • Case study: How surface finish affects performance
  • Alicona’s solution: Focus-Variation
  • Live demo: Automatic edge measurements with IF-Edgemaster
  • Modules: Measure radius, angle, wear, difference between target and actual – regardless of coating


What is IF-Edgmaster
The IF-EdgeMaster is an optical 3D measurement device to automatically measure cutting tools. Typically, the system is used to measure cutting edges regardless of type, size, material or surface finish of the tool. Users measure radii > 2µm as well as rake, wedge and clearance angle of cutting edges. Both waterfall-type and trumpet-type are precisely measured. The robust technology of Focus-Variation delivers stable and traceable measurements also in a production near environment.

You can register for the webinar here.

You can find every info published about Alicona in Eurotec here.


Alicona Imaging GmbH
Teslastraße 8
8074 Grambach/Graz
Tel. +43 316 4000 700
Fax +43 316 4000 711
[email protected]

In Switzerland:
Microcube Sàrl
Route du Bois-Genoud 1A
CH-1023 Crissier
Tél. +41 21 635 82 20
Fax +41 21 635 82 21
[email protected]



…brought to you by eurotec-online.com