The positioning slides FSG are characterized by a compact design with a square base. On their top and bottom, they have each four threaded holes and cuts for centering sleeves that are arranged in a standardized square grid pattern. It is thus not necessary to add holes for fixing or positioning.
They are available as linear slides X, cross slide XY or vertical slide Z. Thanks to the before mentioned holes and the supplied thin shaft screws and centerings, they can be combined with each other. Within their respective dimensions, the linear and the cross slides have identical heights, allowing easy replacement without adjustments.
Extremely practical is the integrated wedge clamping. This allows the guide clearence of the slide to be set precisely or to be reduced to zero. It allows also a reliable, vibration-resistant locking. Due to this innovative arrangement, all FSG-positioning slides can be set and blocked with the same hexagon wrench from the front side, which allows its use even in very confined spaces.
The positioning slides are available in three frame sizes:
FSG 4030: Area 40x40mm, 30x30mm bore grid
FSG 6048: Area 60x60mm, 48x48mm bore grid
FSG 8060: Area 80x80mm, 60x60mm bore grid.
The FSG 6048 and 8060 X and XY are available in steel and aluminium.
The range of applications is virtually unlimited, be it in automation systems or assembly lines, in optical devices, at manual workstations, among small presses or other assembling devices.
Set-up and start-up costs can be significantly reduced with these clever Automation helpers. The simple setting and blocking of the position in modules, pick and place equipment and devices of all kinds, saves time and reduces costs.