Witschi Electronic AG remporte le Grand Prix des Exposants 2017

Grâce à son ingénieux système de mesure WisioScope, la société bernoise Witschi Electronic AG a été élue par ses pairs pour soulever le trophée du Grand Prix des Exposants 2017.

Ives Soldati, société Witschi Electronic AG, reçoit le Grand Prix des Exposants 2017

 
Créé depuis 6 ans pour récompenser le projet le plus innovant de l’année présenté au Salon EPHJ-EPMT-SMT, le Grand Prix des Exposants a rassemblé pour cette édition un nombre très important de dossiers de candidature qui ont été transmis à un Jury d’experts.
Ce Jury a sélectionné 6 nominés : Witschi Electronic AG, Techniwatch, Rifft, Precitec, Enovasense et Coat-X. Les projets de cette liste de 6 nominés ont ensuite été soumis au vote des exposants juste avant l’ouverture du Salon.

 
A l’issue de ce vote, c’est la société Witschi Electronic SA, basée à Büren, dans le Canton de Berne, qui a recueilli le plus de suffrage et qui a donc reçu le Grand Prix des Exposants 2017 ce 20 juin, lors de la soirée d’ouverture du Salon EPHJ-EPMT-SMT. « C’est une très belle reconnaissance pour notre produit, le WisioScope, déclare Ives Soldati, responsable des ventes de Witschi. Mais c’est avant tout le résultat de nombreuses années de recherche en collaboration avec le CSEM de Neuchâtel. »

 
Le WisioScope est un appareil de mesure très innovant dédié à la manufacture et à la maintenance des oeuvres horlogères. D’une part, les mesures acoustiques et les mesures optiques de la marche et de l’amplitude se font avec une simplicité d’utilisation et une précision inégalée. D’autre part, la caméra et l’écran tactile intégré permettent de visualiser le mouvement grâce à une utilisation de l’effet stroboscopique. Grace à une collaboration avec le CSEM à Neuchâtel, un système optique de faible taille a été conçu. La miniaturisation permet de coupler étroitement la mesure acoustique et la mesure optique sur un seul microphone. Pour l’utilisateur, des nouvelles applications deviennent accessibles, telle que la mesure des oscillateurs à haute fréquence.

A propos de Witschi Electronic SA
Witschi Electronic SA développe et fabrique depuis 70 ans des appareils de test et de mesure de haute qualité. Le but initial de l’entreprise consistait à fournir la meilleure technologie de test et mesure pour l’industrie horlogère. Witschi Electronic a déjà atteint ce but par le passé. Il garde toute son actualité pour une clientèle plus diversifiée. À partir de son siège principal de Büren an der Aare, Witschi Electronic gère une filiale à Hong Kong et des représentations dans plus de 30 pays du monde entier. Witschi Electronic emploie environ 80 collaborateurs au total.

www.witschi.com

Motorex: 100 years of success based around the green barrel

Customised products, approachability, and innovative capacity: The long-established Bucher AG Langenthal celebrates its 100th anniversary in June. The lubricant manufacturer with the green barrel has had an eventful history – one that has always been focused around meeting customers’ requirements.

As the largest independent clean-oil refinery in Switzerland, Motorex develops and produces innovative lubricants and technical chemicals. The internationally operating family business with locations in Germany, Austria, France, Sweden, and Poland is active in a wide range of industries, from agriculture through construction to motorsports. Motorex products are constantly being enhanced and tailored to meet special requirements – right down to those of the smallest customer. Together with outstanding quality products and a comprehensive range of services, the SME’s ability to occupy know-how-intensive market niches has proved key to ensuring success on the international market, despite facing stiff competition. Or, as the founding family Regenass-Bucher likes to put it: “The family firm gives the multinationals a run for their money.”

Rex becomes Motorex

The start was modest enough, however. On December 3, 1917, the company was established under the name of “Rex”, specializing in the manufacture of leather and floor-care products. The owners, with cofounder Arnold Bucher among them, drove the company’s growth with great skill, adding motor oils to the range in 1947. A milestone in the company’s history that saw Rex become Motorex. The company went on to focus on highly promising lubricants and care products, continuously expanding its range.

Today, Motorex boasts the biggest storage tank capacity in Switzerland. The company is able to store up to eight million liters of oil, allowing it to provide lubrication solutions for any application, from wheels, to motors, to watches. Motorex is everywhere, and has become our constant companion.

The long-term challenges of quality and s ustainability

Today, Motorex is the largest lubricant manufacturer in Switzerland, employing over 350 highly qualified people, and distributes its products in over 80 countries. The brand’s worldwide success has been achieved and consolidated thanks to targeted research, remarkable innovative capacity, and a typically Swiss penchant for perfection. The company boasts various ISO certificates and aims to achieve systematic quality management across all process stages – placing the requirements of customers at the center, as always. “We pursue quality and leadership in our products with unswerving continuity, and attach great importance to constantly improving our customer service,” says Motorex CEO Edi Fischer. “This maxim is of course also reflected in the laboratory in Langenthal, which recently benefited from extensive renovation work. In addition, we are currently adding new production and administration buildings at our headquarters. With first-class Swiss-made products in Langenthal, Motorex is ready for the future.”

“Given the nature of our business, it goes without saying that the scarcity of fossil fuels is an issue for us.” It is of vital importance to the company in general to operate sustainably and have as little impact as possible on the environment: “Motorex takes responsibility for constantly optimising safety, health, and environmental protection, without being required to do so by laws and regulations.”

EPHJ-EPMT-SMT 2017, Genève, Stand C97

www.motorex.com

The future of technology at your fingertips: Register for Micro Nano MEMS now

Visitor registration is now open for Micro Nano MEMS 2017, which will take place at the annual Sensors & Instrumentation show in Hall 1 at the NEC, Birmingham on Tuesday 26 and Wednesday 27 September 2017. Visitors will benefit from access to innovative and exciting feature areas, the latest technologies and products from the line-up of exemplary exhibitors and CPD accredited seminars. Plus, the first 200 visitors that make it through the door before 10am on each day will be treated to a complimentary breakfast, sponsored by Keller.

Micro Nano MEMS offers attendees the opportunity to explore market-leading solutions in the micro and nano technology field. The event will cover the full spectrum of technologies, from laser micromachining through to micro injection moulding, and from MEMS fabrication, through to assembly, inspection and test equipment.

What’s more, visitors will also be able to attend expert-led, CPD accredited seminars taking place during both days of the event and covering a range of intellectually stimulating topics. Event manager Jacqui Henderson comments: “The seminars are of great interest to visitors, offering a wealth of knowledge and expertise on some of the most significant findings and progressions in the micro and nano manufacturing field.”

As a part of Sensors & Instrumentation, Micro Nano MEMS also has access to the brand new and fully interactive feature area Connecting Industry L!VE, featuring Stanley Qubit, a fully autonomous NAO-25 humanoid robot as seen on BBC 1. Visitors will be able to see new products live and in action as exhibitors take to the stage to showcase the latest developments in the industry; a unique opportunity to learn how such products can be beneficial to business progression.

Also new this year is the Drone Zone Demo Area, hosted by UK Drone Show. The Drone Zone features demonstrations of the real life applications that are possible with advancing drone technology, incorporating intricate micro technologies, and the obstacles that will need to be overcome for this vision to become a reality.

Returning for 2017 is the popular Formula 1 Simulation Car, sponsored by PR Electronics, guaranteed to bring a competitive and entertaining edge to the event while providing the perfect networking opportunity. Also returning is the Innovation Showcase, which has been expanded to allow even more exhibitors to display their products.

For more information and to register visit

www.micronanomems.com

AM industry asks the EU to support research and education

For the third consecutive year, CECIMO organized the “Additive Manufacturing European Conference” (AMEC) on 7 June 2017 in the European Parliament in Brussels (Belgium). The event was a great success, gathering more than a hundred participants among industry leaders and policy-makers. Speakers at AMEC used this occasion to bring attention on the need of a deeper EU approach.

 
AMEC III was organised by CECIMO and co-hosted by Brando Benifei (S&D), Anthea McIntyre (ECR) and Cora van Nieuwenhuizen (ALDE), Members of the European Parliament. The event highlighted Europe’s outstanding know-how in the development of industrial additive manufacturing and addressed the existing challenges for its adoption in Europe.

At a time of new competitors on the international stage, the conference pointed to the EU policy-makers’ role in advancing Europe’s position in the industry. Industrialists and decision-makers on stage converged on the provision of research funding, support to standardization efforts and creation of a large pool of talents for the industry as key issues for support from the EU policy community. As Filip Geerts, CECIMO Director General, said, “it is important to have a forward-looking approach, which will serve the EU in achieving its larger goals, like industrial policy, digitization but also e.g. circular economy”.

AMEC III elaborated also the CECIMO “European Additive Manufacturing Strategy”. The document provides an overview of the policy fields that deserve priority attention of EU authorities. It collects the inputs of several experts and details recommendations to speed up the AM uptake. The Strategy is available on the website at the following link: http://cecimo.eu/site/index.php?id=272.

About CECIMO
is the European Association representing the common interests of the Machine Tool Industries globally and at EU level. We bring together 15 National Associations of machine tool builders, which represent approximately 1300 industrial enterprises in Europe (EU + EFTA + Turkey), over 80% of which are SMEs. CECIMO covers 98% of total Machine Tool production in Europe and about 36% worldwide. It accounts for almost 150,000 employees and a turnover of nearly €24 billion in 2016. Approximately 75% of CECIMO production is shipped abroad, whereas around half of it is exported outside Europe. CECIMO assumes a key role in determining the strategic direction of the European machine tool industry and promotes the development of the sector in the fields of economy, technology and science.

 www.cecimo.eu

Exhibitors affirm the successful concept of Moulding Expo

Second Moulding Expo attracts around 15,000 visitors from 52 countries to Stuttgart / Greater internationality

Even the première two years ago was a total success. And shortly after the end of the trade fair, it was clear that the second edition of the International Trade Fair for Tool, Pattern and Model Making at the Stuttgart Trade Fair Centre had made an impression on the over 760 exhibitors and around 15,000 visitors from Germany, Europe and many other countries in the world.

“I have never experienced a trade fair which has become established so quickly and at such a high level among exhibitors. I had the impression that the visitors wanted to really absorb the programme items. We have given the tool, pattern and mould making industry a home,” enthused Ulrich Kromer von Baerle, President of Messe Stuttgart. .

Intensive exchanges in the exhibition halls

Exhibitors at Moulding Expo 2017 praised, in particular, the quality and the unusually long duration of the discussions – which often lasted more than one hour. Internationality was another advantage: the visitors came from a total of 52 countries, primarily Austria (16%), Switzerland (12%), Italy (10%), Turkey (8%), the Czech Republic (6%), France and Portugal (5% each). Compared with the première of Moulding Expo, the proportion of international visitors rose from 11% to 15%.

The around 15,000 trade visitors represented every major branch of industry: automobile and automotive component supply industry (42%), tool and mould making (28%), mechanical engineering and plant construction (23%), plastics processing industry and production (16%), pattern making and prototyping (11%) plus various user industries.

The Buyers’ Forum of the Federal Association of Materials Management, Purchasing and Logistics (BME) was also held concurrently with Moulding Expo at the Stuttgart Trade Fair Centre. The exhibitors responded positively  to the two guided tours of different exhibition stands for the Forum participants.

Other figures from the trade fair survey: 76% of visitors said that they were solely responsible, jointly responsible or acted in an advisory capacity in regard to purchasing and procurement in their company. 83% of visitors said they would recommend the trade fair to other people.

Live high-tech experience

The accompanying programme containing special shows on trend topics, international technical forums with first-class speakers and extensive career information for young people in the industry underlined the concept of Moulding Expo “from the industry for the industry“. In particular, the opportunity to experience the many different subject areas live and at close quarters went down very well with visitors. The trade fair give-aways produced live from high-tech moulds proved to be real hits: over 11,000 units of the eating cutlery “3-2-eat!“, which were injection moulded on the spot by students from Reutlingen University, were given to visitors. The “Polyman” learning component, which was also produced during the trade fair, also made a lasting impression.

High-ranking politicians as visitors

The visit by Winfried Kretschmann, Minister-President of Baden-Württemberg, was a clear indication of how important Moulding Expo has become in the political landscape in Baden-Württemberg. After his tour through the trade fair, he said he was very impressed with the quality of the event. Katrin Schülz, State Secretary in the Baden-Württemberg Ministry of Economics, Labour and Housing, spent two days at the trade fair. The Minister-President and the State Secretary were especially interested in the large number of programme items for young people and school classes.

“The positive response from all participants and the visibly positive mood in the industry are reason enough for Messe Stuttgart to start looking forward to the third edition of Moulding Expo in May/June 2019,” said Ulrich Kromer von Baerle.

www.messe-stuttgart.de

Industry 4.0 award for Arburg

On 22 May 2017, Arburg was honoured with the “100 Centres of Industry 4.0 Excellence in Baden-Württemberg” award. This award was initiated by the “Industry 4.0 Alliance for Baden-Württemberg” network initiative to honour special achievements in the Industry 4.0 sector.

Arburg received the “100 Centres of Industry 4.0 Excellence in Baden-Württemberg” award because its products enable flexible high-volume production in batches as small as a single unit.

A total of 16 Baden-Württemberg-based “flagship projects for manufacturing of the future” were honoured on 22 May. State Secretary for Economic Affairs, Katrin Schütz said: “Industry, small and medium-sized enterprises and start-ups in Baden-Württemberg are leading the way in implementing Industry 4.0, as is impressively demonstrated by today’s award-winning solutions. Our aim with this award is to promote tangible solutions from the region, which create added value. The aim is to encourage small and medium-sized enterprises in particular to actively exploit the real opportunities offered by Industry 4.0.”

Arburg wins with “flexible high-volume production of single-unit batches”

Katrin Schütz pointed to Arburg as a perfect example of a company that has distinguished itself for decades through its innovative strength and, thanks to its 30 years of experience in IT-networked production, counts among the pioneers in the implementation of “Industry 4.0”. Arburg’s demonstration of “flexible high-volume production of single-unit batches” convinced the panel of judges and received the “100 Centres of Industry 4.0 Excellence in Baden-Württemberg” award in the “New Software/Networking Solutions” and “New Production Process” categories.

With its flexible, automated, IT-networked and spatially distributed production of “smart” luggage tags, Arburg recently showed how high-volume production can be combined with the customisation of individual plastic parts at the Hannover Messe 2017 in April. This example shows the future of modern business models, with the aim of integrating customers and their requirements in the value chain and individualising high-volume parts.

Economically efficient production of “smart” luggage tags

The “smart luggage tag” shows how such “mass customisation” can be achieved relatively simply by combining injection moulding and additive manufacturing without sacrificing the efficiency and cost-effectiveness offered by high-volume production. An Allrounder injection moulding machine, a Freeformer for industrial additive manufacturing, as well as automation and IT solutions from Arburg form a flexible cyberphysical production system.

Using an individual NFC chip, the injection moulded product produced on an Allrounder becomes the data and information carrier and controls the further production operations to become a one-off part. It communicates with the machines at the various production stations, knows its own history and current status, as well as navigating its own path through the process chain. The individual plastic design is applied in an additive process using the Freeformer.

A central element here is integration with Arburg’s proprietary ALS host computer system. This records the product, process and quality data and transmits it to a web server. In the “luggage tag” example, each part has its own website. The data for each component can be retrieved and traced at any time, even after many years. Digital networking through the host computer system promotes transparency and consistency and facilitates the optimum utilisation of the full production capacity, particularly in the case of smaller unit volumes and frequent product changeovers.

 “100 Centres of Industry 4.0 Excellence in Baden-Württemberg”

The aim of the “Industry 4.0 Alliance for Baden-Württemberg” network initiative is to pool expertise in production technology, as well as information and communication technology, to bring together all key players and to encourage small and medium-sized enterprises in industry to move towards Industry 4.0 through innovative information-sharing initiatives.

The “100 Centres of Industry 4.0 Excellence in Baden-Württemberg” competition seeks to identify innovative concepts in industry that have succeeded in the intelligent networking of production and value-added processes. As well as examining the level of innovation, the panel of expert judges also assesses specific practical relevance with regard to Industry 4.0. To date, a total of 84 companies, institutions and other organisations have been presented with a certificate and a glass plaque in five award rounds. This number is to reach 100 over the course of 2017.

www.arburg.com