Delcam has launched a new web site, [www.partmaker.com->http://www.partmaker.com, for its PartMaker CAM system for programming the full spectrum of production machining equipment. The site details the many benefits that have prompted thousands of users with sophisticated machine tools to select PartMaker for their programming needs. The new PartMaker website shows why thousands of companies have chosen the software for their programming needs. A key part of the new PartMaker site is a (…)

With the new MAM 72-100 H 5 axes horizontal machining center, Matsuura brings a new dimension to its 5 axes range. The 100 H designation refers to the maximum diameter of parts which is 1000 mm and the letter H indicates the horizontal position of the spindle. This machine has been developed to apply a maximum machining power on the part through the very rigid horizontal milling spindle; while the 4th and 5th axes are applied on the palette. It is also designed to enable very precise (…)

The company announced this morning that Mr. Paul Häring, CFO, resigned from his function to be able to pursue other interests. A successor will be recruited. In order to secure a smooth transition, Paul Häring will remain in the CFO function until appointment of the successor. M. Michaël Hauser, CEO of the Tornos group just communicated that Mr. Häring is active in several boards of directors and wanted to be able to spend more time on these mandates - what was not fully possible with his (…)

Ten years ago, German companies working in the field of medical technology generated revenue of approximately 5 billion euros. According to the estimates produced by UBM Canon, organiser of the Medtec Europe trade show, (13-15 March 2012 in Stuttgart), this sum has now risen to over 20 billion. Reflecting this dynamic growth, Medtec Europe has now also become Europe’s leading trade show for medical technology. Medtec was launched in 2002 when it welcomed approximately 100 exhibitors. Since (…)

Stephan Nell is set to become the new Chairman of the Management Board of Körber Schleifring on January 1st, 2012. In this position he is succeeding Richard Bauer, who in future will be concentrating fully on his responsibilities as Chairman of the Executive Board of Körber AG. Körber Schleifring, the holding company of the Machine Tool Division, is also being relocated to Switzerland. This means the holding company is being moved to the direct vicinity of the operating business (…)

Trophies awarded at Midest in Paris are not stopped by border; exactly, like the Franco-German alliance Jores/Meca-Rectif winner of the "partnership-alliance” category. In a few years these two double surface grinding subcontracting companies have evolved from fierce competitors to partners working hand to hand to develop the market. Meeting with Mr. Torsten Jores and Philippe Chapé, the two CEO’s. “We simply combined our forces to develop the market” says Mr. Jores. But behind this short (…)

Micro-cutting stents is one of the most demanding manufacturing applications in the medical device industry. With tube diameters between 1mm and 10mm and a wall thickness of around 100µm, precision cutting is essential. It is also critical that the cut metal does not have rough edges as the stents are permanently inserted into arteries. At this year’s BIOMEDevice exhibition, held in San Jose, California, 6 - 7 December, visitors to JK Lasers’ booth discovered how medium power range, single (…)

In the area of consumer electronics, multi-touch has not only changed the ergonomics of devices, it has changed user habits as well. In industrial automation, this technology has the potential to make machine operation more intuitive, faster and safer - in essence, to bring about a revolution in ergonomics for machine and system visualization units. B&R introduces devices that allow multi-touch input in industrial environments. In industrial automation, there has been a strong and (…)

The guide bushes delivered with Tornos Deco7 and Micro7 machines have a thread of M10x0.8, which is difficult to find and not according to international standards. Walter Dünner SA proposes the alternative to allow customers to set up their machines with guide bushes from different producers. The two proposed nuts adapt the machine in order to set up guide bushes with M10x0.75 thread. The machine equipped with such a nut will then also be able to accept the same guide bushes as set on (…)

Christian Thönes to become deputy member of Executive Board. http://eurotec-online.com/wp-conten...On December 13 at the meeting of the Supervisory Board of Gildemeister Aktiengesellschaft Christian Thönes (39) was appointed as deputy member of the Executive Board effective as of 1 January 2012. This takes account of the growing internationalisation in the areas of products, product development and technology. In his new appointment he will be responsible for the future direction of (…)