CAD

Delcam to show PartMaker programming and modelling at SIAMS

April 2014

Delcam will demonstrate the 2014 versions of its PartMaker CAM system for Swiss-type lathes, turn-mill equipment and bar-fed mills, and the PartMaker Modeling CAD-for-CAM software at the SIAMS exhibition to be held in Moutier, Switzerland, from 6th to 9th May.

PartMaker 2014 includes Delcam’s Vortex high-efficiency area clearance strategy and many other enhancements.

PartMaker 2014 marks the introduction of Delcam’s Vortex high-efficiency strategy for area clearance into the PartMaker CAM suite. Other enhancements in the 2014 version include improved back-turning and 2D pocketing functionality, support for additional tool types and faster programming of lead-in and lead-out moves, and a new NC program viewer among other improvements.

Optimal cutting conditions Vortex is Delcam’s newest proprietary high-speed roughing technology. Vortex controls the maximum engagement angle of the cutter in the material, such that the angle calculated for the programmed stepover is never exceeded, even in internal corners. This allows for optimal cutting conditions to be maintained throughout the toolpath. By controlling the maximum engagement angle and the load on the tool, Vortex can take deeper cuts than traditionally used in roughing operations. Depths of cut up to the full flute length enable maximum material removal rate from solid carbide tooling and reduce machining times by up to 70%.

Back turning tools included PartMaker 2014 also includes improved functionality to support the automated programming of back-turning tools. These tools are used across a wide variety of small-part turning applications, particularly in Swiss machining. With their unique geometry and cutting characteristics, back-turning tools can eliminate the need for multiple tools and so can reduce cycle time and improve surface finish.

For further information on Delcam’s PartMaker CAM software, please contact: Peter Dickin, Marketing Manager Direct phone: 44 (0)121 683 1081 [email protected]

Delcam plc, Small Heath Business Park, Birmingham, B10 0HJ, UK www.delcam.com

New reseller in Switzerland

AM Engineering GmbH Murtenstrasse 15 3210 Kerzers Tel. +41 31 741 2330 Fax +41 31 741 2860 [email protected] www.am-e.ch .

...brought to you by Eurotec-Online.com

CAD

FAKUMA Review - Virtual product development - precise and made-to-measure

November 2021

We looked forward to FAKUMA 2021 with great anticipation, and then it was over so quickly! SimpaTec, being a competent engineering and software partner for the plastics processing industry, once again was present in Friedrichshafen with its own stand. The focus of the exhibition was set on new approaches and solutions in terms of sustainability, environmental protection, recycling and circular economy. SimpaTec’s contribution to a truly holistic virtual product development and therefore an (...)

CAD

Enhanced Options in Simulation

August 2021

During Fakuma 2021, SIGMA Engineering presents the latest release of SIGMASOFT Virtual Molding. It furthermore contains refined prediction of warpage besides numerous enhancements for calculation of multicomponent parts and introduces the new option to analyze compression molding processes. The new SIGMASOFT release allows users an even more accurate prediction and analysis of warpage. At Fakuma (12.-16. October 2021) in Friedrichshafen, Germany, SIGMA Engineering GmbH presents (...)

CAD

ESPRIT CAM improves productivity for long part machining by automating multi-spindle program creation

April 2021

New computer-aided-manufacturing (CAM) technology has been introduced by ESPRIT CAM, part of Hexagon’s Manufacturing Intelligence division that provides manufacturers with the control and flexibility needed to use multi-spindle and multi-channel computer-numerical-control (CNC) machinery for the machining of long parts. More accurate simulation of spindle transfers and bar pulls enables manufacturers to exploit multi-tasking machinery with high productivity program creation of error-free (...)

CAD

Improving Part Deformation and Cycle Time with Virtual Molding

June 2019

The reduction of cycle time is an essential condition in every injection molding operation. At the same time, it is important to deliver the required part quality in terms of dimensional stability. SIGMASOFT Virtual Molding with its Autonomous Optimization technology allows comparing multiple scenarios in terms of cooling placement and mold material, to achieve both conditions at the minimum cost per part. The reduction of cycle time is crucial in every injection molding operation. At the (...)

CAD

Latest InvoMilling CAD/CAM Software Changes Gear Cutting with New Advanced Features

January 2018

Cutting tool and tooling system specialist Sandvik Coromant has extended the functionality of its InvoMilling software. The latest version of this user-friendly CAD/CAM solution for fast and simple NC programming offers more possibilities when manufacturing gears on universal five-axis machining centers. As of late 2017, the software will also enable customers to produce straight bevel gears and herringbone gears. InvoMilling exploits machine tool kinetics for the effective and flexible (...)

CAD

SIGMA Award: Günther Heisskanaltechnik and Speedturtle rewarded in 2017

December 2017

During the third SIGMASOFT International User Meeting at the beginning of November SIGMA Engineering presented the SIGMA Award for the first time. Rewarded projects show a consistent use of SIGMASOFT Virtual Molding to reduce costs or necessary resources significantly. The first winners are GÜNTHER Heisskanaltechnik and Speedturtle. For years SIGMA Engineering GmbH, Aachen, Germany, finds projects at their customers, in which the full potential of modern simulation approaches has been (...)

CAD

Radan 2018 R1 focuses On CAD/CAM, and Industry 4.0

November 2017

As well as taking “a major step forward” with technology geared towards helping sheet metal manufacturers implement Industry 4.0 smart factories in its latest version, Radan will now be issuing two new releases a year. “We’re aiming to get the very latest developments to customers as quickly as possible,” says Radan’s Product Manager Olaf Körner. “Starting with Radan 2018 R1, customers needn’t ever be working with software that is more than six months old.” The new release includes a number of (...)

CAD

Vero Waveform Saves Tool Costs of Over £100 Per Part

February 2017

Trials carried out with Seco Tools show that Vero Software’s powerful, game-changing Waveform Roughing Strategy can save nearly £130,000 on cutting tool costs for 1,000 parts, compared with conventional machining strategies. The results came from trials using a Seco 20mm tool, cutting components from EN24 steel. Vero’s Strategic Partnership Manager, Wesley Tonks, says: “Tool life is dependent on how the tool is implemented within the machining process. We always state the increase in material (...)

CAD

Tombstone Module: One Of 50 Edgecam Updates

November 2016

The new 2017 release of Edgecam introduces a Tombstone module for assembling pre-existing parts on a defined mounting device. A simple dialog window enables users to add pre-machined part files, specifying the positions they are to be mounted on a tombstone or other multi-component work-holding device. Once they are assembled, Edgecam automatically merges and rationalises all machining sequences by tool or index position and optimising the NC output into sub-routines. Edgecam Brand Manager (...)

CAD

MachineWorks used across Vero Software portfolio

September 2016

Vero Software the world’s number one CAM-focused software, has renewed their 17-year long relationship with MachineWorks, and also extended the use of MachineWorks Software throughout its wide product portfolio. In recent years, Vero has acquired a number of leading CAM manufacturers who were existing clients, and already successfully using MachineWorks to drive the CNC simulation with its industry standard verification engine. Products such as PEPS, Alphacam, Edgecam, and Surfcam were (...)

Delcam to show PartMaker programming and modelling at SIAMS

The Eurotec Newsletter