General about Eurotec

Eurotec articles on the blog

May 2009

Dear readers,

I’ve pottered quite a lot on the content of the blog and I’m happy to announce that the articles of Eurotec are now available in three languages on the "articles" page. There you can (re)discover every article published in Eurotec starting January 2009. It is another way to communicate and obviously that chapter of the blog doesn’t reduce the importance of the paper issue that groups everything on a convenient magazine. Nevertheless if you’re looking for a precise topic, forinstance cleaning, you will find it useful to have every article published on the topic under the same page. I do hope this service may meet your requirements.

In term of advertising, it is also possible to put your banner on that part of the blog, see information here.

I’ve received a few mails from people giving me ideas for the blog and the magazine, thank you! I’ll be back with these ideas soon.

Enjoy the nice spring weather (if you’re in the Northern Hemisphere) py

General about Eurotec

Summer break

July 2021

We are taking a break and will be back on 9 August. Until then, we wish you a great summer. See you soon...

General about Eurotec

A new guy at your service!

January 2015

On February first, Eurotec will welcome a new Editor-in-Chief. After 6 years of passionate discoveries in the field of microtechnology, the previous guy (I) will leave Eurotec to meet new challenges. Thank you all for the exceptional meetings we were able to organize and for your openness in giving me information (in order to allow me write nice articles helping you to communicate in the European microtechnology community). A Pierre-Yves to replace a Pierre-Yves Welcome to Pierre-Yves (...)

General about Eurotec

Best wishes and season’s greetings from the Eurotec Team

December 2014

Another year full of interesting discoveries is about to come to its end and we would like to thank all the companies and people we’re working with for their confidence and support. Also thank you to the more and more numerous readers of our online source of information. Merry Christmas and happy New Year The online daily news will be stopped for a few days and will be back on January 5 with industry and microtechnology news. We are eager to carry on bringing you valuable info through both (...)

General about Eurotec

What’s new on Eurotec’s ?

November 2014

We’ve done some maintenance on the website and I am happy to inform you on the main aspects you can benefit from while surfing with us (and you will also learn a few facts on our paper issues). Actually as you may not know it, our website displays pieces of news day after day, but it is also a complete database of all the articles published in Eurotec from issue 1/2009. Those are classified under the Article link and 2013 compilations that summarise all the articles on that topic. Those (...)

General about Eurotec

Happy Summer time…

July 2014

We at Eurotec wish a happy Summer time to all our readers (online and paper indeed), the lucky ones that have a break and the ones that will carry on working. Our newsstand will now be closed for about two weeks. With the incoming trade shows in France (Micronora), Germany (AMB), Italy (BiMu), UK (Micro Nano Mems) and USA (IMTS), and an economic situation that seems better for manufacturers (according to Cecimo-to be read in our next issue), there is no doubt that some novelties will hit (...)

General about Eurotec

Eurotec iPad Air just won by…

May 2014

At the end of the day, Eurotec customers were invited to the now traditional aperitif with the draw of the iPad. As usual the event was organised by the Boucherie Nyffeler, Moutier and l’Etoile, Perrefitte and was just perfect ;o) We take advantage of this post to warmly thank our customers for the nice shared event as well as for our very good collaboration. You are the best! Among the 40-50 people there, the lucky ones to win the Eurotec iPad Air are: Suzanne and Michel Yerly from Yerly (...)

General about Eurotec

Merry Christmas and happy 2014

December 2013

And here we are: again the end of the year. Once again this year was full of interesting discoveries and I would like to thank all the companies that opened their doors to my enquiring pen. Thank you to have allowed me to write all these nice stories! Indeed we are already working on Eurotec’s next issue(s) to bring you valuable information about our microtechnology world… and there are always many stories and pieces of news to communicate about! … stay tuned! Thank you ALL We at Eurotec (...)

General about Eurotec

Another batch of valuable stuff on its way

October 2013

Indeed it’s my writing to say so and I hope you will share this feeling about next issue of Eurotec. Again we’ve worked hard to fetch some valuable information for you. All the novelties we discovered this autumn go well in this same direction, each company wishing to provide a better and more precise answer to the wishes of its customers and potential customers, isn’t it great? In Eurotec 390 you will be able to discover: Other ways to manufacture Tailor-made transfer machine with (...)

General about Eurotec

Incredible novelties just unveiled

September 2013

On this EMO’s eve the companies active in our field are busy preparing their product launches in Hannover and indeed we have some news for our readers. Innovation is more than ever bringing distinctive assets to companies active in microtechnology. In Eurotec’s latest issue you will be able to discover many of those in premiere: Machines Almac – Complete new product range Hermle – Combining MIM and machining Humard Automation – High precision turning machine designed by users Kern – Hard (...)

General about Eurotec

Last rest before EMO – Happy Summer Time

July 2013

Eurotec’s newsstand is now on holidays for about two weeks! For those who are happy to have a few days off, Enjoy! We will be back soon with a lot of news. With EMO and World Medtec Forum coming, the manufacturers at every level of the production chain in microtechnology (parts, machines, peripherals, components, sub-assemblies, material or services providers) are busy preparing their offer to better serve their customers. Some pieces of news we were able to fetch are really amazing and (...)

Eurotec articles on the blog

The Eurotec Newsletter