Control

Precision Center in Vienna

February 2010

Hexagon Metrology GmbH in Wiener Neudorf expands to include a demonstration centre. From today Austrian customers have live access to the Hexagon Metrology product world. On 28 and 29 January 2010, the new Precision Center was officially opened by Per Holmberg, President of Hexagon Metrology Europe, and Holger Fritze, General Manager of Hexagon Metrology Germany and Austria. It is attached to Hexagon Metrology’s existing GmbH in Wiener Neudorf, south of Vienna. {}

"With the new Precision Center in Wiener Neudorf, we are extending our presence in Austria and continuing our strategy of making ourselves quickly and easily reachable by our customers all around the world. We now have 59 Precision Centers in 25 countries," says Per Holmberg. In addition to being a demonstration and training centre, the Wiener Neudorf facility provides an operating base for Hexagon Metrology service and sales staff.

Dates for servicing measuring equipment can be booked with the Hexagon Metrology team over the new Hotline for Austria Tel. +43(0)2236 860 070 60. The technical service department has been an integral part of the GmbH in Wiener Neudorf since 01 January 2010.

Hexagon Metrology GmbH Precision Center Wiener Neudorf Brown-Boveri-Str. 8 2351 Wiener Neudorf Austria Phone +43 (0)2236 860 0711 Fax +43 (0)2236 860 070 E-mail [email protected] www.hexagonmetrology.com

Control

Leuze invites you to the sps 2023 in Nuremberg

October 2023

From November 14 to 16, 2023, Leuze will be presenting its latest innovations and highlights to visitors at the sps trade show: Hall 7A, Booth 230. Come. Experience. Sense. And return home with a good feeling.The trade show booth is set to be lively and interactive, a place that invites you to come and talk to the Sensor People. Make yourself at home and find out more – this is Leuze’s motto for this year’s sps. Trade show visitors can look forward to the Sensor People’s new trade show (...)

Control

iNspect: Simple Infrared Machine Vision Solution

March 2023

Simple, cost-effective thermal machine vision solution built for the factory floor. For users of Teledyne FLIR fixed thermal camera solutions such as the FLIR A38/A68, the GEVA 400 iNspect package offered by Teledyne DALSA is a simple and affordable solution. It is pre-loaded with iNspect software (now with 16-bit camera support) that connects to GigE-based FLIR thermal camera platforms including the FLIR A70, FLIR A400/A700, and FLIR A38/A68. This package is customizable for various (...)

Control

Detect every small part

November 2022

The new fork sensors of the GS 04B and GS 08B series from Leuze detect even the smallest objects with absolute reliability. They are ideal for reliable detection in high speed applications. Even the smallest objects can be reliably detected - as proven by the new Leuze GS 04B and GS 08B series fork sensors. They detect objects as small as 0.05 mm in diameter. Due to their high switching frequency of up to 10,000 HZ, they are well suited for use in fast automation processes. Users benefit (...)

Control

NORDAC PRO: The all-rounder among control cabinet inverters

September 2022

NORD DRIVESYSTEMS expands its NORDAC PRO inverter family to include sizes with powers of up to 22 kW. All five sizes in the product series have an integrated multi-protocol Ethernet interface and a slim, compact design. NORD thus offers the perfect electronic solution for its optimally matched drive systems - and does so for a wide power range. The new NORDAC PRO SK 500P control cabinet generation from NORD DRIVESYSTEMS will be expanded to include two power levels, covering the power range (...)

Control

PIONEERING SURFACE INSPECTION SOLUTION GIVES MANUFACTURERS GREATER PRODUCTION ADVANTAGE

April 2019

Ametek Surface Vision, a world leader in automated online surface inspection solutions, continues to evolve its highly successful SmartViewsurface inspection solution, greatly enhancing production capabilities for manufacturers globally with significant software improvements. SmartView’s superior performance in detecting surface flaws and defects has enabled it to maintain its position as a market-leading materials inspection solution for three decades. Key to this dominance is the modular (...)

Control

Major efficiency gains made through machining insights

March 2019

Using digital solutions for monitoring of equipment utilization makes workshops far more efficient and profitable than would otherwise have been possible, which is why Sandvik Coromant has introduced CoroPlus MachiningInsights. More than a monitoring system, the solution gathers data, calls attention to issues and provides the insights required to take action. It is an easily attainable step for manufacturers that are looking to reduce waste in production and make a smooth transition into (...)

Control

3D sensors for quality inspection and measuring technology

March 2019

SmartRay, the leading manufacturer of 3D sensors for quality inspection and measuring technology, has launched a new addition to its highly successful ECCO sensor family, optimally balanced for the diverse application requirements of consumer electronics manufacturing. Delivering high-speed 3D scanning performance in an economical and compact design, ECCO 95.020 provides an ultra-high resolution and superior 3D image quality that ensures faster production lines and throughput. Utilising (...)

Control

ATOS Capsule – Optical Precision Measuring Machine for Quality Assurance with Highest Image Resolution

January 2017

GOM GmbH, based in Braunschweig, Germany, is expanding its ATOS series by a new sensor for full-field digitizing and inspection of contoured part geometries. The fringe projection system is used for production quality assurance of small to medium-sized parts and excels by its high precision for fine details. ATOS Capsule is used, for example, for first article inspection of gears, turbine blades and wheels as well as medical parts. In addition to surface deviations from CAD, GD&T data (...)

Control

Renishaw unveils the new XM-60 multi-axis calibrator

September 2016

Renishaw, the world-leading metrology specialist, exhibited its new XM-60 multi-axis calibrator at IMTS 2016, Chicago, USA and AMB 2016, Stuttgart, Germany. The XM-60 is capable of measuring all six degrees of freedom from a single set-up, in any orientation for linear axes. It offers significant improvement in simplicity and time saving over conventional laser measurement techniques. As demands on component tolerances increase, manufacturers are now required to consider all error sources (...)

Control

XL-80 laser functionality extended to perform diagonal tests

November 2015

Renishaw launched a Linear diagonal measurement kit at EMO 2015. Laser diagonal tests can be used to measure diagonal positioning and reversal errors in accordance with B5.54 and ISO 230-6 standards. The ISO 230-6 standard states that diagonal displacement tests allow the estimation of the volumetric performance of a machine tool. The new kit is quick and easy to set-up, is easy to align and allows fast data analysis to international standards. The Renishaw Linear diagonal measurement kit (...)

Precision Center in Vienna

The Eurotec Newsletter