Machines

Turbomill magnetic chucks

April 2012

Braillon Magnetics invented and built the first Electro-Permanent magnetic chuck in 1963. Since then the E-P technology has evolved constantly, resulting in a range of very powerful, reliable and sturdy magnetic chucks for chip removal operations.

Magnetic workholding for milling by Braillon Magnetics.

Today, the most common EP technologies are

Full demag system: energizing by a single current impulse; de-energizing by alternating current impulses resulting in a complete demagnetisation of both chuck and components.
Compensated system: energizing and de-energizing are both accomplished by a single current impulse. Chuck is fully off, components of tool steel may have some residual magnetism. Strong assets E-P magnetic chucks being permanent magnetic chucks which are energized and de-energized by current impulses, are :
Safe, the magnetic power cannot get lost in case of a mains power failure
Powerful, using the most efficient permanent magnets
Accurate and sturdy, no moving parts
Ecological, no continuous power consumption

Turbomill features and sizes All Braillon Magnetics turbomill chucks are machined from a solid block of steel, resulting in the highest rigidity and magnetic efficiency. The benefits being a higher accuracy and a much longer chuck life. Naturally, all Turbomill chucks are 100% watertight. Braillon magnetics ‘s range consists in three EP milling chucks. These three chucks allow users to choose the most effective solution according to their needs.

Clamping solutions for everyone KnowHow, efficency and reliability are the company’s claim. Braillon Magnetics offers magnetic clamping solutions for almost every single application: clamping for ships removal machine tools, high temperature quick mould change, workholding, contact free coupling, demagnetizing... The company also provides a large number of options to finely tune its products to the users’ needs.

Braillon Magnetics ZI ALPESPACE BP6 73806 MONTMELIAN Cedex - FRANCE Phone +33 479 842 145 Fax +33 479 841 449 www.braillon.com [email protected]

By the way, you can download a free magnetic and cutting forces calculation software on the website of the company here.

Machines

CECIMO commits to contribute to a new european industrial strategy

March 2017

Mr Luigi Galdabini, President of CECIMO and Managing Director of Galdabini SPA, was one of the renowned panellist at the first European Industry Day that took place on 28 February 2017. He supported SMEs’ view and reported the challenges that the industry faces accessing new technologies. This intervention was in line with the “Joint Declaration for an ambitious EU industrial strategy” signed by 125 European manufacturing associations, which calls the European Institutions to define and (…)

Machines

Scarborough UTC Invests in 600 UK’s industrial Machine Tools for ’Engineers of Tomorrow’

January 2017

Scarborough UTC’s brand new training facility was proudly opened in September 2016 with the aim of educating the engineers of tomorrow. To ensure the facility gives students the best possible introduction to industry, they sourced machine tools, almost in their entirety, from 600 UK. Scarborough UTC acquired Colchester Student centre lathes, a Harrison Alpha CNC combination lathe, Clausing turret milling machines, pedestal drills and bandsaws to fill the workshop, accompanied by a range (…)

Machines

Supreme connectivity, laser technology and 3D metal printing: Okuma launches new generation of machine tools

November 2016

Okuma presented a new line of machine tools at the 28th Japan International Machine Tool Fair (November 17- November 22, 2016). The manufacturer’s trade innovations included state-of-the-art 5-axis vertical machining centres and a new type of intelligent multitasking machine. Among the highlights was the introduction of the world’s first multitasking machines capable of milling, turning, and grinding as well as laser-hardening and 3D metal printing. Smart factory, just-in-time-production, (…)

Machines

Optimize thermal management during plastic injection with GF Machining Solutions’ AM S 290 Tooling Additive Manufacturing (AM) solution

August 2016

One year ago, GF Machining Solutions signed a strategic partnership with global Additive Manufacturing (AM) leader EOS, headquartered in Krailling, Germany. The partnership demonstrates the companies’ commitment to advancing AM as a leading technology and working together to ensure its seamless integration into the conven-tional manufacturing chain. The AM S 290 Tooling, based on the established and proven EOS technology, is a system dedicated to the mold and die industry and from now on (…)

Machines

AMB 2016: The machine tool goes digital. Expert interview with Prof. Dr.-Ing. Christian Brecher / Machine of the future the key topic at AMB in Stuttgart

June 2016

Machine tools are becoming increasingly more precise, quicker and better. This will also be demonstrated during the forthcoming AMB, International Exhibition for Metal Working in Stuttgart from 13 to 17 September 2016, which is expected to attract 90,000 visitors. However, the basic principle of the metal cutting machine is changing very little. Several rotatory and linear axes are combined differently in a closed housing. The control units are also not readily accessible. In times of (…)

Machines

CECIMO forecasts growth to continue in 2015

October 2015

CECIMO, the European Association of the Machine Tool Industries presents the state of the European machine tool industry at EMO Milano 2015: • The European machine tool production will grow to 23.6 billion euros in 2015; • Machine tool sales in Europe will reach 14.2 billion euro in 2015 thanks to the improving business confidence. Together with the European economy, the European machine tool (MT) production also intensified in 2014: it grew by1.3% to reach 23.0 billion euro. Since the (…)

Machines

New design for even more functions

February 2015

Tornos EvoDeco machines continue to meet the needs of the most demanding bar-turners with ease! Already recognised as highly advanced, this platform is undergoing constant improvement During the [Journées Horlogères open days->http://eurotec-online.com/2015/01/1...;(March 3 to 6, 2015), Tornos will unveil a complete overhaul of these iconic machines. We met with Massimo Tidei, project manager, and Philippe Charles, product manager, both of whom work for Tornos. The fastest machines on (…)

Machines

LSR processing at Medtec Europe 2015

February 2015

Arburg will present an application for processing liquid silicone (LSR) on exhibition stand no. 5B04 in Hall 5 at the Medtec Europe to be held in Stuttgart from 21 to 23 April 2015. An electric Allrounder will produce bellows used as a valve in medical test devices. This application is designed to showcase Arburg’s expertise and demonstrate the potential of the LSR material in medical technology, as well as to demonstrate that the clean room connection to the machine via an encapsulated (…)

Machines

Performance, flexibility and cost effectiveness

February 2015

Rollomatic presented its GrindSmart 528XF for the first time at GrindTec 2014 in Augsburg. Since then, a number of tool manufacturers all over the world are using this innovative and flexible tool grinding machine, which has established an outstanding new benchmark thanks to its innovative design and precision. One major advantage of the GrindSmart 528XF over other machines available on the market is that it has the capability to grind extremely long drilling tools with diameters of less (…)

Machines

Linear motor tool grinders

January 2015

After much anticipation ANCA launched the new FX Linear range of CNC tool grinders at the Prodex exhibition in Basel in November on the Springmann booth. The range includes 3 models and represents not just a completely new design of machine and colour for ANCA, but also a significant number of new technologies – including cylindrical linear motors for the first time. The models in the range include the FX3 Linear – an entry level model, FX5 Linear which replaces the existing FastGrind (…)

Turbomill magnetic chucks

The Eurotec Newsletter