Innovation

To turn and grind on the same machine

June 2013

We already presented this new Schaublin machine on these pages (and you will be able to discover more in Eurotec’s next issue). Nevertheless I was able to take a few pictures yesterday… Enjoy.

With its large machining area and the pivoting NC, set-ups and production are very easy.

The new 202TG was presented at the Schaublin inauguration of its new building on June 21 and Rolf Muster, CEO tells us: “We are very confident for the future with this new machine, the first was sold on June 20 to a Malaysian company and a few more are being negotiated. It’s very positive for a machine that has not been officially launched”. This customer is active in the automotive industry but the machine is dedicated to all fields of activity..

Basically the kinematics of the machine is simple, it includes a synchronous motorspindle (up to 7’000 rpm, 30 Nm) with a W25 nose and possible use of a bar loader (19 mm max.). Two cross-slides receive the different tooling on both sides and the tailstock as well as the part catcher are mounted on a gantry.

Another picture to see the tailstock supporting the part for better machining.

The new 202TG is programmed classically in ISO.

. Schaublin Machines SA Rue Nomlieutant 1 2735 Bévilard Suisse Tél. +41 32 491 67 00 Fax +41 32 491 67 08 [email protected] www.smsa.ch

...brought to you by eurotec-online.com

Innovation

Smart Factory: fully automated flexible production, even for small quantities

May 2023

For years, production costs have been heading in only one direction, that is to say, steeply upward, while the demand is for ever lower manufacturing prices. On top of this, there is a lack of skilled workers. These are the challenges that confront many manufacturers, including WTO, a maker of static and driven precision toolholders. The solution appears to be obvious: a fully automated production hall. In series production, one can always rely on established methods, but for small batch (...)

Innovation

Ensuring harmonious human–machine collaboration in the cockpit

July 2019

Led by CSEM, the PEGGASUS consortium is set to enable new types of human–machine interface (HMI) across cockpit avionics, pushing the boundaries of augmentation in the cockpit. Using the latest in artificial intelligence (AI) and computer vision technologies, this European-funded project will integrate—for the first time—remote eye-gaze tracking and gesture recognition for pilots in a single framework. Its purpose is to enhance human-machine interaction in the complex flight operations of (...)

Innovation

Ensuring harmonious human–machine collaboration in the cockpit

June 2019

Innovation

Swedish Steel Prize 2019 is now open for entry

May 2019

Applications are now being accepted for the Swedish Steel Prize 2019, the steel industry’s most prestigious award, which celebrates its 20th anniversary this year The Swedish Steel Prize is an award for ideas and products that have an impact on future steel solutions, and it attracts competitors from across the world. It will be awarded on November 14th, 2019 in Stockholm, Sweden as part of the Swedish Steel Prize 2019 event. Applications are now being accepted. This year marks the 20th (...)

Innovation

Solution for foldable glass displays: LPKF enables fatigue-free folding of glass

May 2019

Foldable displays are the newest trend in smartphone technology. Current folding displays are made of plastics and are therefore prone to scratches, wrinkles and premature breakdown and malfunc-tion. Conventional smartphone displays do not have these problems because they are made up of at least two layers of tempered glass. Due to the glass, however, these displays cannot be folded easily. LPKF Laser & Electronics AG presents a solution for this problem at this year’s SID Display Week. (...)

Innovation

DFAB HOUSE is officially open

March 2019

DFAB HOUSE has officially opened today on the NEST building of Empa and Eawag in Dübendorf (Switzerland). It is the world’s first inhabited “house” that was not only digitally planned, but also – with the help of robots and 3D printers – built largely digitally. The construction technologies were developed by ETH Zurich researchers in collaboration with industrial partners. A delicate concrete ceiling – cast in 3D-printed formwork – and a curved concrete wall created by a construction robot (...)

Innovation

The first dexterous and sentient hand prosthesis has been successfully implanted

February 2019

A European project has developed the first clinically viable dexterous and sentient prosthetic hand usable in real life. This next-generation medical device heralds a breakthrough for the recovery of hand function after amputation. CSEM has contributed to the development with its ultra-low-power processing and communication technology. Despite decades of research and development on artificial limbs, amputees currently have to make do with powered prostheses based on 40-year old technology. (...)

Innovation

Sigma certified with Quality Seal “Innovative through Research” anew

October 2018

Sigma Engineering GmbH was again awarded with the quality seal “Innovative through Research” by the “Stifterverband für die Deutsche Wirtschaft”. The seal shows the Stifterverband’s appreciation of researching companies in Germany. In September 2018 Sigma Engineering GmbH, Aachen, Germany, again received the quality seal “Innovative through Research”. In continuity of the past years, Sigma was certified as company with a strong commitment to research and development by the “Stifterverband für die (...)

Innovation

EIT @ 10: from paper to Europe’s one-stop shop for innovation

October 2018

The European Institute of Innovation and Technology (EIT) marks the 10 years since the unique EU one-stop shop for innovation was created. This evening, the EIT will also announce the winners of the EIT Awards 2018. 38 nominees are competing in categories recognising excellence in innovation, with women entrepreneurs making up more than 40% of the nominees. More than 350 innovators will gather in Budapest for the EIT’s annual Innovation Forum, INNOVEIT, to discuss the EIT’s unique role (...)

Innovation

Predictive Maintenance: Sensor system for driven tools

September 2017

With the new sensor system Heimatec.Cybercon 4, different tool parameters can be measured and forwarded to a monitoring station. The collected data can be used for maintenance purposes and to prevent machine failures. Digital tool management becomes a reality with Heimatec.Cybercon 4. The sensor system, which has been integrated into the driven Heimatec tool, can be used to measure various tool parameters such as operating time, rpm, temperature or humidity. As the company explains, the (...)

To turn and grind on the same machine

The Eurotec Newsletter