World premiere presentation by EPFL and Savoie University of a mechanism devised by a synergy of partners to resolve the problem of consistency in quality control.
World premiere presentation by EPFL and Savoie University of a mechanism devised by a synergy of partners to resolve the problem of consistency in quality control.
Visual perfection is one of the key attributes of any luxury item. To this day, visual inspection is a task that comes down to the keen eye of experts in beauty. Thus, in the world of high-end luxury and cosmetic beauty, there are as many definitions of beauty as there are subjective criteria for judgment, since every brand lays down its own standards that go towards establishing its own individual style. It is the expert’s task to determine whether a batch considered good, or merely acceptable, whether a satin-finish is deemed sufficiently shiny, or whether a Côtes de Genève motif is seen as a true reflection of the brand’s ethos? The answers to this quest for excellence will vary from one brand to the next and they are now delivered by experts whose eyes and powers of concentration are put to their sternest test.
A tool to help expert’s eyes (and others) The fallible nature of the human eye, depending on the time of day and cumulative tiredness, can cause inconsistencies in the systematic determination of minor anomalies, or varying degrees of severity in the appraisal of the "inspector", the visiting specialist in charge of quality control. "Our apparatus is used to measure whether the expert always says the same thing", explains Professor Jacques Jacot, manager of the project conducted within EPFL’s Microtechnology Production Laboratory (MPL), adding that the device can also be programmed according to subjective, personalisable criteria. This strange machine comprises a small tower, atop which a camera sits, and finally a whole series of adjustable LEDs for lighting. Although it has yet to acquire its ultimate aesthetic form (Asyril and Qualimatest, the two parts manufacturers involved in the project will undoubtedly find the solution), this ultra-perfectionist visual inspection system looks to be full of promise, and not just for the watchmaking sector.
This can be discovered at EPHJ from tomorrow!
On the same subject, you can read the article about the .
Do not miss to pay us a visit on our booth if you go there.
Cheers Pierre-Yves Kohler
The divide is widening ever further between advocates of a ‘no-rules’ approach and those in favour of more or less stringent legislation – seemingly to the detriment of the latter. Are entrepreneurial freedom and respect for individual rights or safety standards necessarily at odds with one another?
The company stands out for its expertise in high-performance composites, a field in which it designs bespoke solutions that meet the most demanding requirements. By Pierre-Yves Schmid A subsidiary of the Busch Group, a global specialist in vacuum pumps employing 8,000 people across 23 production sites worldwide, Composites Busch began operations in 1988 in Chevenez, manufacturing vanes for these pumps. Now based in Porrentruy, this company, which employs 103 people, still manufactures (…)
In mid-February, the Switzerland Innovation Park in Biel hosted the second edition of the International Humanoid Forum. University professors, established industrialists and start-up executives came from all over the world to share their vision of the potential integration of humanoid robots in industry, healthcare and the home. At the end of two days of conferences, seminars and workshops, the question was no longer whether this integration would happen, but when... Points of view. The (…)
This year, the coveted HERMES Startup Award goes to a young Swiss company. The startup impressed the independent jury, chaired by Prof. Dr.-Ing. -Ing. Holger Hanselka, President of the Fraunhofer Society, with the ultra-thin, fully flexible solid-state batteries they have developed. The award was presented by Dorothee Bär, Federal Minister for Research, Technology and Space, during the official opening of HANNOVER MESSE on April 19, 2026, in the presence of Federal Chancellor Friedrich (…)
Dürr’s latest innovation enables direct 2K varnish return in the atomizer, eliminating VOC emissions, successfully used in two lines for a year. Until now, significant amounts of volatile organic compounds (VOCs) were released into the paint booth during flushing and color changes with mixed two-component (2C) paint systems. In conventional processes, residual paint is flushed forward into a funnel or directly into the washout, leading to VOC pollution in over 70 percent of the booth air. (…)
For years, production costs have been heading in only one direction, that is to say, steeply upward, while the demand is for ever lower manufacturing prices. On top of this, there is a lack of skilled workers. These are the challenges that confront many manufacturers, including WTO, a maker of static and driven precision toolholders. The solution appears to be obvious: a fully automated production hall. In series production, one can always rely on established methods, but for small batch (…)
Led by CSEM, the PEGGASUS consortium is set to enable new types of human–machine interface (HMI) across cockpit avionics, pushing the boundaries of augmentation in the cockpit. Using the latest in artificial intelligence (AI) and computer vision technologies, this European-funded project will integrate—for the first time—remote eye-gaze tracking and gesture recognition for pilots in a single framework. Its purpose is to enhance human-machine interaction in the complex flight operations of (…)
Led by CSEM, the PEGGASUS consortium is set to enable new types of human–machine interface (HMI) across cockpit avionics, pushing the boundaries of augmentation in the cockpit. Using the latest in artificial intelligence (AI) and computer vision technologies, this European-funded project will integrate—for the first time—remote eye-gaze tracking and gesture recognition for pilots in a single framework. Its purpose is to enhance human-machine interaction in the complex flight operations of (…)
Applications are now being accepted for the Swedish Steel Prize 2019, the steel industry’s most prestigious award, which celebrates its 20th anniversary this year The Swedish Steel Prize is an award for ideas and products that have an impact on future steel solutions, and it attracts competitors from across the world. It will be awarded on November 14th, 2019 in Stockholm, Sweden as part of the Swedish Steel Prize 2019 event. Applications are now being accepted. This year marks the 20th (…)
© 2026 EUROTEC - ALL RIGHTS RESERVED.