Ten years ago, the NASA rovers Opportunity and Spirit landed on Mars. It keeps going and going and going. "It is equipped with maxon brushed DC motors" the company proudly announced recently.
Ten years ago, the NASA rovers Opportunity and Spirit landed on Mars. It keeps going and going and going. "It is equipped with maxon brushed DC motors" the company proudly announced recently.
Today, Opportunity is still exploring Mars – an unbelievably long time, considering the robot was only designed to last about 90 days. It has covered a distance of approximately 39 kilometers so far and continues to roam around a vast area. On board, 39 maxon brushed DC motors can be found.
On January 25, 2004, the Mars rover Opportunity landed in the Eagle crater. Since then, it has been investigating the planet for NASA (National Aeronautics and Space Administration), a USA agency responsible for the exploration of space. It has examined a number of craters, dunes, and flats, always searching for traces of water. It did not take long before Opportunity found first indications (sediment structures, minerals) that there used to be water on Mars. The Mars rover is able to take photos, brush the ground and drill into stone and it continues to do so today. “The rover is in exceptionally good condition for its age”, says John Callas, a manager at NASA. However, things haven’t always been easy for the rover in the past ten years. Its wheels have become stuck in the sand requiring a very difficult maneuver to release them once again. Sand storms disabled the solar panels and prevented the batteries from recharging. Opportunity is now starting to show a few small symptoms of aging: the 185 kg robot has a bit of “memory loss” – every now and again, its hard disk shows signs of wear caused by the long period of use.
39 km and 39 maxon drives With drives manufactured by maxon motor, Opportunity has been able to safely navigate the surface of Mars for ten years. The rover contains a total of 39 brushed DC motors that are all still operating reliably. They are used to drive the robotic arm, the Rock Abrasion Tool (RAT), the cameras, the control mechanism and the wheels of the rover. The motors are standard products with diameters of 20 to 25 millimeters and an efficiency of over 90 percent. Minor modifications were necessary to adapt the DC motors for the harsh environmental conditions: the temperature on the surface of Mars fluctuates between approximately -120 °C and +25 °C.
This speaks about reliability of maxon motors (as well as all other pieces of equipment on the robot) indeed, but also about human genius. We at Eurotec haven’t thought to use Opportunity to spread the microtechnology messages of our customers to the red planet!
.
.
.
...brought to you by Eurotec-Online.com
AGILOX expands its product portfolio with an intelligent dolly mover. With the new AGILOX ODM, the AMR manufacturer is targeting a completely new area of application: the transport of small load carriers. After AGILOX ONE and AGILOX OCF, now comes AGILOX ODM. The company, which specializes in logistics robots, is adding an autonomous dolly mover to its range of intelligent transport systems controlled by swarm intelligence. AGILOX is thus targeting a completely new area of application: the (…)
Kollmorgen, a global leader in motion control systems, today announced the new TBM2G series of frameless servo motors, introducing features that simplify the design of collaborative, surgical, aerospace and defense and other robots while delivering optimal performance in a lighter, more compact package. These new motors will complement Kollmorgen´s existing TBM and KBM series of frameless motors. Resulting from several years of research, testing and customer feedback, the TBM2G series (…)
METAL LS, the Bulgarian manufacturer of door locking systems, door and window handles and building hardware, started planning the new automated assembly of door locks in 2019. The robotic systems that the company already used for other applications were too large for the planned production site, so the new solutions needed to be as compact and precise as possible, in addition to being state of the art. Door and security locks are precision parts with standard dimensions and components (…)
ABB is entering into a strategic partnership with Swiss-based start-up Sevensense, founded in 2018 as a spin-off from ETH Zurich, to enhance ABB’s new autonomous mobile robotics (AMR) offering with artificial intelligence (AI) and 3D vision mapping technology. The technology will offer customers unprecedented levels of flexibility as mobile robots will be able to navigate autonomously in complex, dynamic indoor and outdoor environments close to people. The partnership is another important (…)
ABB has launched a new family of modular machine tending application cells for the metals industry aimed at maximizing flexibility and machine utilization while minimizing lost productivity caused by unforeseen production stoppages. Featuring six different versions, the FlexLoader™ M family offers a variety of ways of loading and unloading machines based on the size, shapes and amount of the workpieces being handled, making it ideal for applications such as foundries and die casting (…)
Students of the ETH project Dyana are fusing animation and robotics together to create a cat-like character with realistic movements. To manufacture their intricate prototype, Andrina Grimm and her team also rely on Sintratec’s 3D printing technology. A unique animatronics Project Dyana began in autumn 2020 as an interdisciplinary focus project of the ETH Zurich and 3 other Swiss universities, in which 14 bachelor students were to design and build a unique robot. Engineering student (…)
ABB today released its white paper on the future of the logistics industry, ‘The new norm: How COVID-19 has accelerated the switch to robotic automation,’ detailing how the pandemic is driving investment in robotics and automation in the logistics industry, with the pandemic accelerating long-term industry trends, such as labor shortages, the growth of omnichannel distribution and the rise of e-commerce. The paper looks at the logistics sector in the post COVID-19 era and the trends (…)
Considered the most important trade show for the plastics processing industry, FAKUMA 2021 (Friedrichshafen, Germany, 12-16 October) is the ideal platform for presenting FANUC’s new ROBOSHOT α-SiB injection moulding machine (Hall 3, Stand B3-3211). The new machine operates at higher injection speeds, and is faster and more flexible than previous-generation ROBOSHOT models. For tool and mould makers, the trade fair premiere of the new ROBOCUT α-CiC wire-cut EDM machine will be the highlight. (…)
ABB today announced it will acquire ASTI Mobile Robotics Group (ASTI), a leading global autonomous mobile robot (AMR) manufacturer with a broad portfolio across all major applications enabled by the company’s software suite. This will expand ABB’s robotics and automation offering, making it the only company to offer a complete portfolio for the next generation of flexible automation. The acquisition, a key part of ABB’s external growth strategy, was signed on July 19 and is expected to (…)
Using robot technology from OnRobot, the students built an automation solution that eliminates worker exposure to the nylon powder used for 3D printing and additive manufacturing. Exposure to the nylon powder is harmful as workers may inhale, ingest or accidentally rub it into their eyes while working. The Lancaster students’ solution reduces worker exposure and eliminates associated health risks. Additive Manufacturing and industrial 3D printing processes are booming, changing the way (…)
© 2026 EUROTEC - ALL RIGHTS RESERVED.