Ten years ago, the NASA rovers Opportunity and Spirit landed on Mars. It keeps going and going and going. "It is equipped with maxon brushed DC motors" the company proudly announced recently.
Ten years ago, the NASA rovers Opportunity and Spirit landed on Mars. It keeps going and going and going. "It is equipped with maxon brushed DC motors" the company proudly announced recently.
Today, Opportunity is still exploring Mars – an unbelievably long time, considering the robot was only designed to last about 90 days. It has covered a distance of approximately 39 kilometers so far and continues to roam around a vast area. On board, 39 maxon brushed DC motors can be found.
On January 25, 2004, the Mars rover Opportunity landed in the Eagle crater. Since then, it has been investigating the planet for NASA (National Aeronautics and Space Administration), a USA agency responsible for the exploration of space. It has examined a number of craters, dunes, and flats, always searching for traces of water. It did not take long before Opportunity found first indications (sediment structures, minerals) that there used to be water on Mars. The Mars rover is able to take photos, brush the ground and drill into stone and it continues to do so today. “The rover is in exceptionally good condition for its age”, says John Callas, a manager at NASA. However, things haven’t always been easy for the rover in the past ten years. Its wheels have become stuck in the sand requiring a very difficult maneuver to release them once again. Sand storms disabled the solar panels and prevented the batteries from recharging. Opportunity is now starting to show a few small symptoms of aging: the 185 kg robot has a bit of “memory loss” – every now and again, its hard disk shows signs of wear caused by the long period of use.
39 km and 39 maxon drives With drives manufactured by maxon motor, Opportunity has been able to safely navigate the surface of Mars for ten years. The rover contains a total of 39 brushed DC motors that are all still operating reliably. They are used to drive the robotic arm, the Rock Abrasion Tool (RAT), the cameras, the control mechanism and the wheels of the rover. The motors are standard products with diameters of 20 to 25 millimeters and an efficiency of over 90 percent. Minor modifications were necessary to adapt the DC motors for the harsh environmental conditions: the temperature on the surface of Mars fluctuates between approximately -120 °C and +25 °C.
This speaks about reliability of maxon motors (as well as all other pieces of equipment on the robot) indeed, but also about human genius. We at Eurotec haven’t thought to use Opportunity to spread the microtechnology messages of our customers to the red planet!
.
.
.
...brought to you by Eurotec-Online.com
Mitsubishi Electric has launched its MELFA RH-10CRH and RH-20CRH SCARA robots, providing manufacturers with greater flexibility in adopting digital manufacturing while addressing skilled workforce shortages. These new robots enhance industrial automation through high-speed operation, easy installation, and exceptional efficiency. Compact and lightweight, they are ideal for manufacturers aiming to boost productivity while navigating space and weight constraints.Image: Left: MELFA RH-20CRH, (…)
A high-caliber jury of experts in robotics has announced the list of nominees for the coveted ROBOTICS AWARD 2025. The award honors companies that are driving pioneering developments in industry with their robot-assisted automation and logistics solutions. This year, three companies have made it onto the shortlist. The winner will be announced on 19 February during the HANNOVER MESSE Press Preview. The jury has selected three companies from among the numerous entries submitted from (…)
Pioneering lightweight robotic arms for a smarter future. RealMan ECO65 Series Robotic Arm RealMan Robotics, a global leader specializing in the development, production and sales of ultra-lightweight humanoid robotic arms, is unveiling its latest robotic arms, joint model and embodied intelligence platforms at Advanced Manufacturing Madrid 2024 in Spain. Highlights from the Exhibition At this year´s event, RealMan is showcasing its ultra-lightweight humanoid robotic arms, including the (…)
Delta, a global leader in power management and a provider of IoT-based smart green solutions, today announced a major advancement in robotics simulation. Its flagship product, the D-Bot Series Collaborative Robots (cobots), now integrates with NVIDIA Omniverse — a platform of application programming interfaces (APIs), software development kits, and services that enable developers to harness Universal Scene Description (OpenUSD) for physical AI — and NVIDIA Isaac Sim, a reference (…)
Discover KUKA’s new KR SCARA robots and learn about their wide range of applications - from the automotive industry to the pharmaceutical industry. Our SCARA robots (Selective Compliance Assembly Robot Arm) are characterized by special features such as their high speed and repeat accuracy. With the KR SCARA in the now available 20-kg payload class and soon-to-be-released 60-kg payload class, we are further expanding our portfolio of four-axis robots. These latest additions offer an (…)
In 2019, COVAL launched its first CVGC carbon vacuum gripper, designed for collaborative robots, when the market was just beginning to exist. Today, in a market that is constantly expanding, COVAL is launching a second generation, optimizing its modularity and compatibility while simultaneously enhancing its performance. More than a simple update, COVAL have redesigned their CVGC carbon vacuum gripper based on feedback from customers, from integrators, manufacturers and operators. This (…)
AI-backed and collaborative solution reduces upstream process times, saving time, energy and resources for warehouse, e-commerce. Comau unveils the newest solution in its Machine Inspection Recognition Archetypes (MI.RA) family of hardware-agnostic, intelligent vision systems, MI.RA/OnePicker. Making its worldwide debut at Automate 2024, North America’s leading automation show, Comau’s new perception-based piece picking solution is the easy and smart way to eliminate unsustainable sorting (…)
Delta, a global leader in power management and a provider of IoT-based smart green solutions, announced today a significant milestone in its development of smart manufacturing solutions with the launch of six highly versatile models in the D-Bot series of collaborative industrial robots (Cobots) at Hannover Messe 2024. The portfolio features Cobots with payload capacities up to 30 kg, reach spans up to 1800 mm, compatibility with EtherCAT, Modbus and CODESYS, as well as the integration of (…)
With a 25-megapixel high-resolution camera, achieving approximately 1.6 times faster speed than conventional models. Yamaha Robotics announced today that on March 1st, 2024, the Company will add the high-end specification YRi-V TypeHS to the YRi-V 3D hybrid automated optical inspection (AOI) system, which achieves both high speed and high precision in operation, for electronic component mounting factories. YRi-V TypeHS has significantly improved image processing capability by adopting a (…)
The acquisition underlines ABB’s strategic investment focus on innovative AI solutions transforming industries, such as logistics and manufacturing. ABB announced that it has acquired Swiss start-up Sevensense, a leading provider of AI-enabled 3D vision navigation technology for autonomous mobile robots (AMRs). Sevensense was founded in 2018 as a spin-off from Swiss Technical University, ETH Zurich. The acquisition follows ABB’s minority investment in Sevensense after it joined the (…)
© 2026 EUROTEC - ALL RIGHTS RESERVED.