Machines

Severall Swiss Premieres on the Springmann booth at Prodex

October 2010

Springmann SA is specialized in providing production machines working by chip removal as well as all the necessary peripherals (i.e. complete solutions). At this year’s Prodex, Springmann will exhibit more than 20 machines. Amongst these, several Swiss Premieres will be unveiled to visitors. In addition, three new brands completing the Springmann product range will be presented.

Amongst several Swiss Premieres: The new Index R200 is a turn-mill center for milling and turning in a new dimension.

A few characteristics of the new R200

Simultaneous milling operations on main and counter spindle
5-axis-interpolation for both milling spindles (available)
Separate subsystems for upper and lower motorized milling spindles, allowing full reverse side machining or parallel machining
Tool strips with a total of 12 stationary tools permanently in the working area
High accelerations and rapid traverse rates
Large tool magazine for 80 / 120 tools
Very short chip-to-chip times
Clearly structured and well accessible work area

Would you like to have an appointment or announce your visit at Prodex? You can fill the online form on the Springmann website here: http://www.springmann.ch/f/inscription-online.php

SPRINGMANN SA Machines-Outils Route des Falaises 110 CH-2008 Neuchâtel Tel 032 729 11 22 Fax 032 725 01 01 [email protected] www.springmann.ch

Machines

GF Machining Solutions is proud to introduce its latest achievement in the application field of silicon carbide wafers, with its recently launched product: the LASER S 500 U.

March 2025

GF Machining Solutions and the LASER S 500 U are setting the course for the future of micromachining with an application using silicon carbide wafer (SiC) that stands apart from conventional wafer machining techniques. Silicon carbide wafer market and trends: To support the global shift towards electrification, silicon carbide (SiC) wafers are increasingly used in powering electronics and radio frequency components. Their widespread use arises from their exceptional thermal conductivity, (…)

Machines

Siemens Xcelerator: Eplan and Siemens enable seamless data interoperability in machine engineering

December 2024

Siemens and Eplan will make engineering and production processes for customers in machine and line building more efficient. Prof. Dr. Friedhelm Loh, owner and chairman of Friedhelm Loh Group and Cedrik Neike, Member of the Managing Board of Siemens AG and CEO of Digital Industries sealed the agreement at SPS • Seamless data exchange between Siemens´ Teamcenter® X software, TIA-Selection Tool and the Eplan software • Collaboration improves tool chain in machine engineering • Machine (…)

Machines

ENOVEAS receives prestigious SEF.Growth High-Potential Label

October 2024

ENOVEAS, a pioneering company in the development of micro-CNC machines, has been awarded the SEF.Growth High-Potential Label, a prestigious accreditation presented by the Swiss Economic Forum (SEF). This award highlights ENOVEAS’ exceptional growth potential and its disruptive approach to meeting industry demands combining technically advanced CNC machining solutions with breakthrough energy and footprint savings. The SEF.Growth jury praised ENOVEAS’ solid business model, which is well (…)

Machines

PRECISION AXIS SYSTEM FOR OPTIMISED TOOL PROVISION

August 2024

Repetition accuracy and long-term stability are fundamental requirements for a tool changer. That is why the machine tool specialist from Burbach relies on the HIWIN GmbH axis systems in the milling machines of the HIGH SPEED EAGLE V5 and V9 series. 4-axis machining, 5-axis machining, shaft machining – the OPS-INGERSOLL milling machines enable numerous variants of multi-axis machining. The Multitool tool magazine is used as an option. "The main focus in a milling machine is not actually (…)

Machines

PRECISION AND PERFORMANCE IN THE PREMIUM SEGMENT

July 2024

Thanks to the left and optional right spindle, the new CTX 7502000 from DMG MORI enables 6-sided complete machining of workpieces up to 2,040 mm in length. With the CTX 750|2000, DMG MORI is presenting a universal lathe at the Open House Bielefeld that will continue the success of the CTX universal lathes. With its large working area, the world premiere is designed in particular for the production of large components and long shafts. Thanks to left and right spindles and a 170 mm Y-axis (…)

Machines

SECTOR GET-TOGETHER WITH TECHNOLOGY TRANSFER – AT THE HERMLE OPEN HOUSE 2024

February 2024

HERMLE presents RS 1 robot system adapted to two 5 axis C 22 machining centres. With their legendary precision and reliability, the 5 axis machining centres manufactured by Maschinenfabrik Berthold HERMLE AG in Gosheim have become a familiar sight in many different industrial sectors over many decades. HERMLE customers can be found in such important areas as tool and mould construction, mechanical engineering, automotive, medical technology, aerospace, the electrical industry and energy, (…)

Machines

DMG Mori horizontal machining centers for more productivity, precision and ecological sustainability

January 2024

As top-class horizontal machining centers, the INH 63 and INH 80 from DMG MORI combine mechatronics, Machining Transformation (MX) and resource-saving CNC production. The new INH 63 and INH 80 horizontal machining centers from DMG MORI set new standards in horizontal machining. In combination with Machining Transformation (MX) from DMG MORI, the two models support users on their way to a sustainable, efficient and competitive future of CNC manufacturing. The horizontal machining centers (…)

Machines

Bystronic presents Bybend star 120 – the compact bending miracle

October 2023

Where applications are too big for a "small" machine and too small for a "big" machine, a special solution is needed. This is the ByBend Star 120. The ByBend Star 120, the newest member of the Bystronic family of pressbrakes, offers you bending technology for the highest demands on process speed, flexibility, and precision. Precisely where you need it. Bending small to medium-sized parts in a variety of sheet thicknesses and materials in higher tensile strength classes then becomes easy (…)

Machines

More efficiency, digitalisation, safety and health with Messer technology

August 2023

The World’s international experts in gouging, cutting and coating will gather this year from September 11th to 15th at the SCHWEISSEN & SCHNEIDEN in Essen – the number 1 meeting point The cutting experts from Messer Cutting Systems also could not fail to be there. Together with their colleagues from Messer Gas they will be presenting their newest innovations and tried and tested solutions for process optimisation in cutting technology. Efficiency, digitalisation, decarbonisation, (…)

Machines

The new generation of 5-axis micromachines

June 2023

After the takeover of Kummer Frères by Precitrame Machines, an analysis of the K5 product showed that it still had too many teething problems to be marketed in volume. This triggered the immediate development of a new generation of micromachine, which was eagerly awaited by the microtechnology industry. This modernisation also makes it possible to integrate new functions and options requested by the markets. Standalone machines In its simplest form, the K5 range is a single machine that (…)

Severall Swiss Premieres on the Springmann booth at Prodex

The Eurotec Newsletter