The three main factors which appeal to users of the new Mikron Multistar NX-24 Rotary Machining System from an economical perspective are outstanding productivity, full flexibility and highest precision. With this the machine is a player in the very top league. With its number of cycling steps, it almost achieves the productivity of fully mechanical machines. All axis are programmable, which saves significantly down-time when changing over the machine from one part to the other.
Using the CNC-programmable Multistar NX-24 rotary machining system is therefore particularly attractive where different types of work pieces must be produced in quantities from a few hundred up to many thousands units, with accuracies in the hundredth of millimeter range.
Mikron SA Agno still offers the world’s most productive and fastest Rotary Machining System amongst its line of Transfer Machines. It achieves up to 150 cycle steps per minute and thus can produce up to 520 parts per minute when equipped with four cycles per machine. The machine is designed for high output, large volume production but, because it is fully mechanically controlled, change-over can take time. The new CNC-controlled Multistar NX-24 increases flexibility significantly and this with only slight reduction in the output capability.
Many advanced features All axis are programmable and the control unit’s clearly laid out operator interface simplifies rapid programming and quick product changes... but that’s only the start! Let’s see a few characteristics of this new machine.
- 24 workstations working simultaneously (on two sides)
- up to 44 machining units
- up to 60 axis working simultaneously
- complete machining (deep hole drilling, turning over the work piece (repositioning/reclamping), in-process measuring and compensation, as well as complete and perfect deburring).
- quick changeover (mainly by software programming)
- reduced idle time (0.6 second to pass from one working position to the next )
- ± 2.5 µm positioning of the table
This machine has many more new features to be discovered at EMO, Hall 17, booth C68
Mikron SA Agno Mr. Axel Warth, Head of Marketing and Business Development or, Mr. Boris Sciaroni, Dipl. Ing. HTL / Marketing Manager Phone +41 91 610 61 11 www.mikron.com [email protected]
Want to have a look on the Multistar NX-24? Watch this out!
.
